-
CALL OPTIONS
TO PLACE A CALL ON EXCLUSIVE HOLD
Press
Hold
twice. Line appearance indicates interrupted wink.
NOTE:
If held line appears on other D
term
stations, LED remains steadily lit red.
TO RETRIEVE
Lift handset or press
Speake
r.
Press held line. Use handset to converse.
NOTE:
Only D
term
®
that set Exclusive Hold option can retrieve the call.
IF UNANSWERED
After preprogrammed time, Automatic Recall is initiated.
Visual and audible signal (rapid flash and ring burst) is sent to station
which placed call on Exclusive Hold.
Recall
shows as a flashing green
LED on your phone, and solid red on other phones with same line.
NOTE:
Exclusive Hold excludes any other phone from picking up your held call. Exclusive Hold shows
as a flashing green LED on your phone. The same line on other phones appears as a solid red LED.
TO TRANSFER A CALL
After conversing, ask party to hold.
Press
Transfer
. Receive interrupted dial tone.
Dial destination station’s extension, hang up or wait for answer.
NOTE:
“TRANSFER” is only displayed when “TAPI” mode is enabled for your extension.
EHOLD 2001
CONFERENCE
With call in progress, ask party to hold.
Press
Transfer
to receive interrupted dial tone.
Dial desired number.
After call is answered, press
Conf
,
Conf
LED lights.
Three- way conference is established.
If one party hangs up, other two remain connected.
Conf
LED goes out.
TO ESTABLISH A BROKER CALL
While engaged in a call and wishing to consult a third party, press
Transfer
. Caller is automatically placed on hold.
Dial desired party to consult.
Press
Transfer
to return to original caller. Third party is automatically placed on hold.
Repeated depression of the
Transfer
button allows you to alternate between calls.
Summary of Contents for NEAX 2000IVS2
Page 1: ...NEAX 2000 IVS2 D TERM SERIES 75 TELEPHONES...
Page 27: ......