NEAX2000
IVS
2
Maintenance Manual
Page 76
ND-70926
(E),
Issue
3.0
CHAPTER 2 TROUBLESHOOTING
Fault Diagnosis and Troubleshooting
(2)
Fault Diagnosis and Troubleshooting
shows the fault information and the remedial action on each fault kind.
shows the fault restoration information on each fault restoration kind. Diagnose contents of
the fault and perform the remedial action listed in
If the corresponding fault restoration kind number shown in
also displays, no
specific action is required.
Table 2-3 Remedial Action on Each Fault Kind
FAULT
KIND
NUMBER
FAULT CONTENT
FAULT INFORMATION
REMEDIAL ACTION
01
System
Initialization
3: XX XX XX XX
4: XX XX XX XX
Kind of System Initialization
related information
1:
Program address
information
2: Receive
command
information
F: No
system
initialization
related information
Initial Kind (See below.)
The address of the program
which caused system
initialization
Initial Kind 0: Power On Initialize
No specific action is required.
Initial Kind 1: Initialize by Reset
Button (SW1)
Initial Kind 2: Serious Failure 1
Replace the MP card.
Initial Kind 3: Serious Failure 2
Replace the MP card.
Initial Kind 5: Serious Failure 3
Replace the MP card.
Initial Kind 6: Serious Failure 4
Replace the MP card.
Initial Kind 7: Serious Failure 5
Replace the MP card.
Initial Kind 8: Serious Failure 6
Replace the MP card.
Initial Kind 9: SW3 was changed to 0
No specific action is
required.
Initial Kind A: Serious Failure 7
Replace the MP card.
Initial Kind B: Initialize by CAT/MAT
No specific action is required.
1 2
3
3
1
2
3
Summary of Contents for NEAX 2000IVS2
Page 1: ...ND 70926 E ISSUE 3 PART OF STOCK 151969 Maintenance Manual FEBRUARY 2001 NECAmerica Inc...
Page 152: ...NEAX2000 IVS2 Maintenance Manual Page 144 ND 70926 E Issue 3 0 This page is for your notes...
Page 156: ...NEAX2000 IVS2 Maintenance Manual Page 148 ND 70926 E Issue 3 0 This page is for your notes...
