B-12 System Setup Utility
Multiboot Add-in (MBA) Window
The MBA lets you set the system boot priority. The boot priority is the order the
BIOS uses to boot the operating system from various devices in your system.
To set the boot priority of your system:
1.
From the SSU Main Menu, launch the MBA by selecting the “Boot
Devices” task under the MBA heading in the task box. Click OK.
2.
When the MBA window displays, the “Boot Device Priority” window lists
the current boot priority order. The “Hard Drives” window lists the hard disk
drive(s) in your system. During bootup, BIOS searches the list of device
types shown in the “Boot Device Priority” list, starting with the first device
on the list. When BIOS gets to the Hard Drives, the BIOS tries each device
shown in the “Hard Drives” list, starting at the top of the list.
3.
To change the priority of an entry in either list, select the entry and click on
the “Move UP” or “Move Down” buttons.
4.
Click on the Save button to save the boot priority.
5.
Click on the Close button to return to the Main Menu.
Summary of Contents for NEAX Express
