CHAPTER 3 SYSTEM DATA PROGRAMMING
– 97 –
ND-71503(E) Rev.5.0
9pch3001.fm
(2) Procedure for Remote Site Increase
STEP1:
Assign all required system data to the MP card of Main Site, including the required data for Re-
mote Site (CM0B Y=31-60).
STEP2:
Load all Key FD data to the Main Site.
For details, refer to Key FD Operation Guide.
[For other than North America]
STEP3:
Execute the system data backup to the Flash ROM of MP card by CMEC Y=6>0:0.
STEP4:
Clear the system memory of Remote Site by CM00>1.
STEP5:
Assign the IP address of Main Site and own IP address to the MP card of Remote Site to be
increased.
STEP6:
Assign own Remote Site number to the MP card of Remote Site to be increased by CM0B
Y=00>90.
STEP7:
Execute the system data backup to the Flash ROM of MP card of Remote Site.
STEP8:
Confirm that the link between Main Site and Remote Site is established.
If not, connect the Main Site and Remote Site by LAN.
– The required system data is copied to the Remote Site from the Main Site. It takes 3-4 minutes
to copy the system data from the Main Site to the Remote Site.
– The Remote Site starts.
JANUARY/16/2004
REMOTE PIM OVER IP DATA ASSIGNMENT
CÔNG TY VIỄN THÔNG VIỆT PRO
Chuyên phân phối tổng đài NEC
http://vietpro.com.vn