CHAPTER 3 SYSTEM DATA PROGRAMMING
– 217 –
ND-71503(E) Rev.5.0
9pch3002.fm
• PN-8IPLA
* This data does not include MAC Header.
12. FAX communication mode of 32IPLA is T.30 in default. To set the voice pass-through mode, FAX
related data setting is required in system data programming.
13. To use 8IPLA, new 32IPLA and old 32IPLA in the same network, the location data setting is required
in system data programming. In addition, FAX communication mode should be set to same as the op-
posite IP-PAD/facsimile.
Example of Network Configuration
Connection Conditions
Required Bandwidth (One-way)
G.711 pass-through, Payload=40 ms.
(No IP Header compression in Router)
72 Kbps (FAX Payload=320 byte)
G.711 pass-through, Payload=40 ms.
(with IP Header compression in Router)
65 Kbps (FAX Payload=320 byte)
G.726 pass-through, Payload=40 ms.
(No IP Header compression in Router)
40 Kbps (FAX Payload=160 byte)
G.726 pass-through, Payload=40 ms.
(with IP Header compression in Router)
33 Kbps (FAX Payload=160 byte)
WAN/LAN
IPS
32IPLA (new)
FAX
FAX
D
term
IP
D
term
D
term
IPS
DM
32IPLA
(old)
FAX
IPS
DM
8IPLA
FAX
Location No.=01
Location No.=02
Location No.=03
Communication with
Voice pass-through mode
Communication
with T.30 mode
32IPLA (new) : PN-32IPLA-A (SPN-32IPLA IP PAD-E)
32IPLA (old) : PN-32IPLA-A (SPN-32IPLA IP PAD-C)
SEPTEMBER/15/2004
IP FEATURE PROGRAMMING
CÔNG TY VIỄN THÔNG VIỆT PRO
Chuyên phân phối tổng đài NEC
http://vietpro.com.vn