CHAPTER 3 SYSTEM DATA PROGRAMMING
– 230 –
ND-71503(E) Rev.5.0
9pch3002.fm
Operating Procedure
No manual operation is required.
DESCRIPTION
DATA
Specify the minimum value of jitter buffer for
the programmable list 4-7.
NOTE 1:
Follow the initial data setting usual-
ly.
NOTE 2:
Assign the value which does not ex-
ceed the maximum value of jitter
buffer set by CM67 Y=21/22/23/
24>09.
NOTE 3:
Set the second data in the range of
01-30 (10 ms. to 300 ms.).
•
(1)
(2)
Y=21/22/23/24
08
01-60: 10 ms.-600 ms. (10 ms. increments)
NONE : No data
Specify the maximum value of jitter buffer for
the programmable list 4-7.
NOTE 1:
Follow the initial data setting usual-
ly.
NOTE 2:
Assign the value which exceeds the
minimum value of jitter buffer set by
CM67 Y=21/22/23/24>08.
NOTE 3:
Set the second data in the range of
01-30 (10 ms. to 300 ms.).
NOTE 4:
Assign the value which is multiple of
the payload size set by CM67 Y=21/
22/23/24>01.
If the setting value of the second
data is not multiple of the payload
size, the value that the reminder is
omitted is assigned to the location
number automatically.
•
(1)
(2)
Y=21/22/23/24
09
01-60: 10 ms.-600 ms. (10 ms. increments)
NONE : No data
B
CM67
END
SEPTEMBER/15/2004
IP FEATURE PROGRAMMING
CÔNG TY VIỄN THÔNG VIỆT PRO
Chuyên phân phối tổng đài NEC
http://vietpro.com.vn
