CHAPTER 3 SYSTEM DATA PROGRAMMING
– 239 –
ND-71503(E) Rev.5.0
9pch3002.fm
DESCRIPTION
DATA
Set the community name with 1-25 characters
(ASCII code).
[Series 3200 R6.2 software required]
•
(1)
(2)
Y=03
10: 1-16 characters
11: 17-25 characters
XXXX....XXXX
NONE : No data
Assign the required IP Address for the SNMP
manager (first place to fourth place).
[Series 3200 R6.2 software required]
•
(1)
(2)
Y=03
80: First place
81: Second place
82: Third place
83: Fourth place
000000000000-255255255255:
IP Address for the SNMP manager
NONE : No data
NOTE
NOTE:
The system allows the access only from the IP address that is set by this command. But if
no IP address for the SNMP manager (first place to fourth place) are set, the access to the
system is allowed to all SNMP managers.
To avoid the anauthorized access to the system, this data setting is required.
To check the IP address of SNMP manager
from the network address, define the IP ad-
dress of SNMP manager (fourth place) as the
Subnet mask of the IP address for the SNMP
manager (first place).
[Series 3300 R8 software required]
•
(1)
(2)
Y=03
03
0 : Subnet Mask of the IP address for the
SNMP manager (first place)
1 : IP address for the SNMP manager
(fourth place)
Set the system information (sysDescr) with 1-
128 characters (ASCII code).
[Series 3200 R6.2 software required]
•
(1)
(2)
Y=03
20: 1-16 characters
21: 17-32 characters
22: 33-48 characters
23: 49-64 characters
24: 65-80 characters
25: 81-96 characters
26: 97-112 characters
27: 113-128 characters
XXXX....XXXX
NONE : IPS
A
CM0B
INITIAL
INITIAL
INITIAL
B
JANUARY/16/2004
IP FEATURE PROGRAMMING
CÔNG TY VIỄN THÔNG VIỆT PRO
Chuyên phân phối tổng đài NEC
http://vietpro.com.vn
