CHAPTER 4 CIRCUIT CARD INFORMATION
– 275 –
ND-71503(E) Rev.5.0
9pch4001.fm
NOTE 1:
When one IPT and one 4VCT reside in PIM 0, two additional LT slots must be left vacant.
When one IPT and two 4VCT reside in PIM 0, three additional LT slots must be left vacant.
When one IPT and three 4VCT reside in PIM 0, four additional LT slots must be left vacant.
When one IPT and four 4VCT reside in PIM 0, five additional LT slots must be left vacant.
NOTE 2:
When one IPT and one 4VCT reside in PIM 1-7, no additional LT slots must be left vacant.
When one IPT and two 4VCT reside in PIM 1-7, one additional LT slot must be left vacant.
When one IPT and three 4VCT reside in PIM 1-7, two additional LT slots must be left vacant.
When one IPT and four 4VCT reside in PIM 1-7, three additional LT slots must be left vacant.
NOTE 3:
One PN-32IPLA/PN-32IPLA-A (IP-PAD) card requires two physical slots and two vacant slots.
• When the IP-PAD card is mounted in the LT01 slot, the LT00 physical slot is required.
The LT02 and LT03 slots must be vacant except the 16VCT card.
• When the IP-PAD card is mounted in the LT05 slot, the LT04 physical slot is required.
The LT06 and LT07 slots must be vacant except the 16VCT card.
When mounting the 16VCT card, use the vacant slot for the IP-PAD card.
• When the IP-PAD card is mounted in the LT01 slot, the first 16VCT (VCT0) card is mounted
in the LT02 and the second 16VCT (VCT1) card is mounted in the LT03.
• When the IP-PAD card is mounted in the LT05 slot, the first 16VCT (VCT0) card is mounted
in the LT06 and the second 16VCT (VCT1) card is mounted in the LT07.
NOTE 4:
Do not mount any other L/T cards in the LT08-LT10 slots when you mount the IP-PAD and
16VCT cards in the LT05-LT07 slots (AP cards are mountable in AP08-AP10 slots).
Continued on next page
JANUARY/16/2004
MOUNTING LOCATION OF CIRCUIT CARDS
CÔNG TY VIỄN THÔNG VIỆT PRO
Chuyên phân phối tổng đài NEC
http://vietpro.com.vn
