CHAPTER 1 GENERAL INFORMATION
– 43 –
ND-71503(E) Rev.5.0
9pch1001.fm
NOTE 1:
The maximum number of Virtual IPT is as follows.
When counting within 8 (Total number of IPT/ Virtual IPT/ CCH/CCT)
→
1
When counting within 24 (Total number of AP)
→
2
NOTE 2:
The total number of CSH and Virtual CSH is maximum 24.
NOTE 3:
When providing Backup CPU system, two cards are required.
NOTE 4:
The total number of ports of the following trunk is maximum 256.
• COT/LDT/ODT
• PRT/BRT/DTI/CCT
• CCIS Virtual IPT/CCIS IPT (Point-to-Point connection/Point-to-Multipoint connection)/
H.323 IPT
NOTE 5:
The total number of ports of CS and IP-CS is maximum 512.
NOTE 6:
The total number of the following ports is maximum 256 per Remote Site.
• Physical PIM Port (Line, Trunk, IP-PAD, CS/ZT)
• Virtual PIM Port (D
term
IP, IP-CS)
• Physical PIM Port (AP card)
NOTE 7:
The total number of B-channel of the following trunk is maximum 127.
• CCIS Virtual IPT
• CCIS IPT Port (Point-to-Multipoint connection)
NOTE 8:
The number of virtual lines assigned on D
term
=1020-number of D
term
/D
term
IP.
NOTE 9:
The number of visitor PS for wireless roaming is included.
(The number of Visitor Location Register is maximum 512 per system.)
NOTE 10:
Since maximum of 64 FP/AP in whole system are divided into Remote Sites, and one Remote
Site accommodates multiple FP/AP cards generally, the actual number of Remote Sites should
be 20.
NOTE 11:
The wireless system is not available at the Remote Site according to the UTAM regulation in
North America.
NOTE 12:
For CCIS via Virtual IPT Point-to-Multipoint connection.
NOTE 13:
For H.323 connection.
SEPTEMBER/15/2004
SYSTEM CAPACITY
CÔNG TY VIỄN THÔNG VIỆT PRO
Chuyên phân phối tổng đài NEC
http://vietpro.com.vn
