CHAPTER 3 SYSTEM DATA PROGRAMMING
– 93 –
ND-71503(E) Rev.5.0
9pch3001.fm
LAN Data Assignment
LAN data assignment is required for the MP card to connect the D
term
IP/MAT/OAI terminal to the system
on the LAN.
NOTE:
When the system is initialized by setting the SW3 on MP card to B (All clear), IP Address and
Subnet Mask will be set automatically as follows.
IP Address : 192.168.1.36
Subnet Mask : 255.255.255.0
DESCRIPTION
DATA
Assign the IP Address for the system.
•
(1)
(2)
Y=00
00
000000000000-255255255255:
IP Address for the system
NONE : No data
Assign the Subnet Mask for the system.
•
(1)
(2)
Y=00
01
000000000000-255255255255:
Subnet Mask for the system
NONE : No data
Assign the Default Gateway Address for the
system.
•
(1)
(2)
Y=00
02
000000000000-255255255255:
Default Gateway Address for the system
NONE : No data
Assign the communication mode and the com-
munication speed for the LAN Interface of the
MP card.
[Series 3400 software required]
•
(1)
(2)
Y=00
05
0 : 100 Mbps (Full-Duplex) fixed
1 : Auto Negotiation
START
CM0B
INITIAL
INITIAL
INITIAL
INITIAL
END
SEPTEMBER/15/2004
BASIC DATA SETTING
CÔNG TY VIỄN THÔNG VIỆT PRO
Chuyên phân phối tổng đài NEC
http://vietpro.com.vn