CHAPTER 3 SYSTEM DATA PROGRAMMING
– 178 –
ND-71503(E) Rev.5.0
9pch3001.fm
NOTE:
Assign the unique location number to each remote site, when system provides the Remote PIM
over IP feature.
DESCRIPTION
DATA
Assign the location number for local connec-
tion where the D
term
IP belongs, to the station
number.
•
(1)
(2)
Y=39
X-XXXXXXXX: D
term
IP Station No.
00-63
: Location No. for Local Connec-
tion
NONE : Location No. 00
Assign the location number for remote connec-
tion where the D
term
IP belongs, to the station
number.
[Series 3100 software required]
NOTE:
D
term
SP20 does not support the re-
mote connection.
•
(1)
(2)
Y=50
X-XXXXXXXX: D
term
IP Station No.
00-63
: Location No. for Remote Con-
nection
NONE : Location No. 00
Assign the location number of the group to
each LCR pattern number for the Virtual IPT.
•
(1)
(2)
Y=5000-5255 LCR Pattern No. 000-255
173
00-63
: Location No.
NONE : Location No. 00
Provide the link reconnecting feature between
PC and the system for each LCR Pattern num-
ber for the Virtual IPT.
[Series 3200 R6.2 software required]
NOTE:
Follow the initial data setting usual-
ly.
•
(1)
(2)
Y=5000-5255 LCR Pattern No. 000-255
174
0 : Not provided
3 : To provide
Assign the location number for the LAN Inter-
face of the IP-PAD card.
•
(1)
(2)
Y=09
00-31: LAN Interface No.
00-63
: Location No.
NONE : Location No. 00
START
CM12
CM8A
CM0A
IP-PAD INITIAL
A
JANUARY/31/2003
LOCATION DATA ASSIGNMENT
CÔNG TY VIỄN THÔNG VIỆT PRO
Chuyên phân phối tổng đài NEC
http://vietpro.com.vn
