CHAPTER 3 SYSTEM DATA PROGRAMMING
– 179 –
ND-71503(E) Rev.5.0
9pch3001.fm
DESCRIPTION
DATA
Specify the CODEC list which is used to nego-
tiate the CODEC type and payload size be-
tween location groups to each location number
assigned by CM12 Y=39, 50/CM8A Y=5000-
5255/CM0A Y=09.
[Series 3200 R6.2 software required]
NOTE 1:
This data setting is valid to the voice
packets that are sent to the group
which is set to “ZZ” in the first data
from the group which is set to “XX”
in the first data.
NOTE 2:
Specify the CODEC type and the
payload size for the location number
of group which D
term
SP20/
D
term
SP30 belongs. Set the CODEC
list that the CODEC type and the
payload size are set as shown in the
table below (D
term
SP20/D
term
SP30
does not support the CODEC type
G.723.1).
Do not set the different CODEC list
to the location groups that the voice
packet is sent/received.
•
(1)
(2)
Y=00
XXZZ
XX: 00-63: Location No. of group
ZZ : 00-63: Location No. of group
0-3
: CODEC List 0-3
(As per CM42)
NONE : See below.
CODEC type
Payload size
Priority 1 G.711
*
40 ms.
Priority 2 G.729a
40 ms.
Priority 3 G.723.1 (6.3k) 30 ms.
Priority 4 G.723.1 (5.3k) 30 ms.
*
A-law/µ-law depends on the SW2-1 on
PN-CP24-A/PN-CP24-B/PN-CP27-A or
the Key ROM (SP-3722 IPS KYUS
PROG-A1) on PN-CP31-A/PN-CP31-B
*
For PBC:
A-law/µ-law depends on CM04 Y=10/11-
40 and the SW2-1 on PN-CP24-A/PN-
CP24-B/PN-CP27-A or the Key ROM
(SP-3722 IPS KYUS PROG-A1) on PN-
CP31-A/PN-CP31-B
A
CM67
Terminal
CODEC TYPE
PAYLOAD SIZE
(MILLISECONDS)
REMARKS
D
term
SP20
G.711
40
Fixed to 40 ms.
G.729a
40
D
term
SP30
G.711
20/30/40
10 ms. is not available
G.729a
20/30/40
B
SEPTEMBER/15/2004
LOCATION DATA ASSIGNMENT
CÔNG TY VIỄN THÔNG VIỆT PRO
Chuyên phân phối tổng đài NEC
http://vietpro.com.vn
