D-19
3-5.
Removal of Units
(1)
Removal of the ADF Unit
1. Remove the Left Cover.
+ D-7
2. Remove the Right Cover.
+ D-7
3. Remove the Rear Cover.
+ D-7
4. Remove the Network Interface Card Board (for NEFAX 691 only).
+ D-7
5. Remove the Document Feeder Unit
+ D-11
(2)
Removal of the PH Unit
NOTES
•
NEVER attempt to replace the PH Unit with power being supplied to this machine.
Doing that could lead to exposure to the laser beam, resulting in blindness
•
NEVER attempt to disassemble or adjust the PH Unit.
Doing that could lead to exposure to the laser beam, resulting in blindness.
6. Unplug the connector PI-104 on the Controller /
Mechanical Control Board.
7. Unplug the two flat cables from the Controller/
Mechanical Control Board.
NOTE
•
Be extremely careful not to break the flat cables.
4980D006AA
8. Remove the two screws.
9. Unhook the two tabs, and then remove the ADF
Unit.
4980D008AB
