ISSUED: 10-01-10 SHEET #: 056-9034-4 07-29-11
Visit the Peerless Web Site at www.peerlessmounts.com
7 of 10
For customer care call 1-800-865-2112
Thread two 1/4-20 hex thin nylon-insert locknuts (not included) on two 1/4-20 threaded rods (not included) to the
desired height of projector mount assembly. Attach projector mount assembly (
A
) to the two 1/4-20 threaded rods
using two 1/4-20 hex thin nylon-insert locknuts as shown in
figure 4.1
or
figure 4.2
.
Installation to Threaded Rod
(Not evaluated by UL - Professional installation only)
4
1/4-20 THREADED ROD
(NOT INCLUDED)
A
1/4-20 THREADED ROD
(NOT INCLUDED)
A
1/4-20 HEX THIN
NYLON-INSERT
LOCKNUT
(NOT INCLUDED)
1/4-20 HEX THIN
NYLON-INSERT
LOCKNUT
(NOT INCLUDED)
1/4-20 HEX THIN
NYLON-INSERT
LOCKNUT
(NOT INCLUDED)
1/4-20 HEX THIN
NYLON-INSERT
LOCKNUT
(NOT INCLUDED)
ARROW
INDICATES
FRONT OF
MOUNT
ARROW
INDICATES
FRONT OF
MOUNT
fig. 4.1
fig. 4.2
