Page 11
Important Information
Do not place the projector in direct sunlight, near heaters or heat radiating appliances. Exposure
to direct sunlight, smoke or steam could harm internal components.
Do not expose the projector to rain or moisture, and do not place any liquids on top of the projector.
Do not expose the projector to dust.
Handle your projector carefully. Dropping or jarring your projector could damage internal
components.
A minimum of four persons are required in order to carry the projector.
Do not hold the projector by the lens. Otherwise the projector may tumble or drop, causing personal
injury.
Before installation, make sure that the surface, ceiling or rigging that is to support the projector is
capable of supporting the combined weight of the projector and lens.
Do not place heavy objects on top of the projector.
Turn off the projector and disconnect the power cable before moving the projector.
CAUTION ON CARRYING THE PROJECTOR / HANDLING THE OPTIONAL LENS
When shipping the projector with the lens, remove the lens before shipping the projector. Always
attach the dust cap to the lens whenever it is not mounted on the projector. The lens and the lens
shift mechanism may encounter damage caused by improper handling during transportation.
The cooling fan settings need to be configured when using the projector in a location at an altitude
of approximately 5500 feet/1600 meters or higher. Consult your dealer in advance.
If you wish to have the projector installed on the ceiling:
•
Do not attempt to install the projector yourself.
•
The projector must be installed by qualified technicians in order to ensure proper operation
and reduce the risk of bodily injury.
•
In addition, the ceiling must be strong enough to support the projector and the installation
must be in accordance with any local building codes.
•
Backup safety chains or wires should always be used with ceiling mount installations.
Consult your dealer for more information.
Do not cover the lens with the supplied lens cap or equivalent while the projector is on. Doing so
can lead to distorting or melting of the cap and burning your hands due to the heat emitted from the
light output.
Do not place any objects which are easily affected by heat, in front of the projector lens. Doing so
could lead to the object melting from the heat that is emitted from the light output.
