Page 12
Important Information
The projector can be operated in numerous positions, as described below.
PITCH
The projector can be positioned at any angle around the pitch axis. Please consider the following:
•
When the projector is within 15° to either side of the vertical plane, the temperature of the
operating environment needs to be between 0 and 30°C.
•
In every other position, the operating temperature is between 0 and 35°C.
ROLL
The projector can be positioned in numerous positions around the roll axis. Please consider the
following:
•
The projector cannot be positioned within 15° to either side of the vertical plane (in portrait
mode) with the inputs pointing downward.
•
When the projector is within 15° to either side of the vertical plane (in portrait mode) with the
inputs pointing upward, the temperature of the operating environment needs to be 0 to 30°C.
•
In every other position, the operating temperature is between 0 and 35°C.
Portrait mode installation requires fitting a safety guard underneath the projector (as shown in the
illustration below). Unauthorised personnel should not attempt to carry out portrait mode
installation. Please contact NEC or a dealer if you wish to use the projector in portrait mode.
Pitch
0-30°C
0-30°C
0-
35
°C
0-3
5°C
±
15°
±
15°
Roll
not allowed
0-30°C
0-
35
°C
0-3
5°C
±
15°
±
15°