47
... English
User Controls
Step 2: Select apply and press the ENTER button on the remote control or the control
panel to submit function or press the MENU button on the remote control or
the control panel to exit.
Step 3: To open Network Connections, click
Start
, click
Control Panel
, click
Network
and Internet Connections
, and then click
Network Connections
. Click the
connection you want to configure, and then, under
Network Tasks
, click
Change settings of this connection
.
Step 4: On the
General
tab, under
This
connection uses the following
items
, click
Internet Protocol
(TCP/IP)
, and then click
“Properties.
”
Step 5: Click
Use the following IP
address
, and type in as below:
1) IP address: 192.168.6.XXX
2) Subnet mask: 255.255.0.0
3) Default gateway:192.168.6.254
Step 6: To open Internet Options, click
IE web browser, click Internet
Options, click the
Connections tab
and click “LAN Settings...
”
Step 7: The
Local Area Network (LAN)
Setting
dialog box appears
,
In
the
Proxy Server area
, cancel the
Use a proxy server for your LAN
check box
., then click “OK
”
button
twice.
Step 8: Open your IE and type in the IP
address of 192.168.6.74 in the URL
then press the ENTER button key.
Step 9: Open “Projector Status and
Control
”
to control your projector.
