24
SELECT
SOURCE
AUTO
ADJ.
ON/STAND BY
FOCUS
LAMP
STATUS
POWER
SOURCE
AUTO
ADJ.
ON/STAND BY
FOCUS
LAMP
STATUS
POWER
SELECT
3. Projecting an Image (Basic Operation)
➍
Adjusting Focus Manually
Adjust the focus manually in the following cases:
• When adjusting the focus out of the effective range of the automatic focus
• When fi nely adjusting the focus
• When the menu setting for [Auto Focus] is turned off
Adjusting with buttons on the cabinet
1. Press the FOCUS button quickly.
The focus adjustment screen will be displayed.
The focus adjustment screen will be closed if no button operation
is made for 5 seconds.
TIP:
If the projector is placed within the effective focus range, press-
ing and holding the FOCUS for a minimum of 2 seconds starts the
Auto Focus function.
2. Press the SELECT
◀
or
▶
button to adjust the focus.
3. Press the EXIT button.
The focus adjustment screen will be closed.
ENTER
EXIT
MENU
UP
PAGE
OFF
POWER
ON
PIC-MUTE
DOWN
FOCUS
Adjusting with the remote control
1. Press the FOCUS + or - button.
The focus adjustment screen will be displayed.
2. Press the EXIT button.
The focus adjustment screen will be closed.
• The focus adjustment screen will be closed if no button opera-
tion is made for 5 seconds.
• Use the FOCUS + or - button to adjust the focus.
TIP:
Pressing the AUTO ADJ button on the remote control causes
the Auto Focus to work when the Focus adjustment screen is dis-
played if the projector is placed within the effective focus range.
