Replacing the Hard Drive in the NVM-2000
7
Install the Replacement Hard Drive (cont’d)
4.
Position the cage assembly as shown in Figure 6.
Figure 6
5.
Secure the cage assembly in place with the four screws (removed
and retained in step 7 of Remove the Recalled Hard Drive). See
Figure 6.
6.
Replace the cabinet cover.
7.
Replace the 5 screws (removed and retained in step 5 of Remove
the Recalled Hard Drive).
8.
Connect the monitor cord and the keyboard cord.
9.
Connect the system power cord.
Note:
Do not turn on system power.