Replacing the Hard Drive in the NVM-2000
3
Locally Back Up the Voice Mail Database (cont’d)
14.
Repeat steps 5 through 7 to back up messages in a mailbox. At the
prompt:
Select the files to be processed:
- System Database D
- Mailbox Messages M
File Type (enter Q to Quit)? [D]
Enter M and Enter. Follow the screen prompts.
15.
When finished, return to the NVM Main Menu.
Remove the Old Hard Drive
WARNING
Do not turn off the NVM without first shutting it down. If
you do not shut down first, you may corrupt the NVM
database when you turn it off.
To remove the old hard drive:
Note:
Instructions assume you are in Full Screen Editor mode.
1.
From the Main Menu, select Exit, and type the password, if the
system requests it.
2.
Select Shutdown Voice Mail System to shut down NVM.
3.
After NVM shuts down, turn off the system power and remove the
power cord.
4.
Remove the Monitor cord and the keyboard cord from the NVM
cabinet.
5.
Remove and retain the five hex-head screws from the rear of the
cabinet. See Figure 1.
Figure 1