CHAPTER 14 ASYNCHRONOUS SERIAL INTERFACE (UART)
User’s Manual U16896EJ2V0UD
406
(7) Selector operation control register 0 (SELCNT0)
The SELCNT0 register is an 8-bit register that selects the TM01 capture trigger.
If SELCNT0.ISEL00 is set to 1 (RXD0 pin is selected) when LIN is used, the transfer rate for calculating the
baud rate error can be checked using TM01.
This register can be read or written in 8-bit or 1-bit units.
Reset sets this register to 00H.
0
SELCNT0
0
0
0
0
0
0
ISEL00
After reset: 00H R/W Address: FFFFF308H
Select TI010 (P35) pin
Select RXD0 (P31) pin
ISEL00
0
1
Selection of TM01 capture trigger (TM010)