background image

17

TELETEXT FORMAT, PICTURE, SOUND CONTROL
Doubling character size
Repeatedly pressing the SIZE (        ) button doubles the
character size in the following order :
Upper half of the pages > Lower half of the page > Return to
normal size.

Volume and brightness control in teletext mode
Pressing the MENU button in teletext mode, the volume and
brightness control menu will be displayed 
at the bottom of the screen.
You can adjust volume and brightness using the
corresponding colour on the remote control unit.

OTHER FUNCTIONS AVAILABLE 
Superimpose teletext broadcasting to the current TV
program using the MIX button
Press the MIX (       ) button again to return to the normal
teletext display.

Watch one TV programme and keep informed at the same
time as some teletext pages are updated

To do this, press CANCEL (       ) button . Then, TV
programme appears on screen and the teletext symbol
appears at the top of the screen.
When teletext programme will be updated, concerned page
number appears on screen. Note that TV programme cannot
be changed with CANCEL button activated.

Pressing the CANCEL  button  again, the teletext page
appears with the updated information.

Summary of Contents for PF51T31






















Reviews: