CHAPTER 4 OPERATION USING GUI SOFTWARE
User’s Manual U17454EJ1V0UM
46
(a) Standard setup
This menu is used to set the rewriting environment of the target device’s flash memory.
The mode of communication with the target device and the operating clock of the device differ depending
on the device used. Refer to the manual of the device used for details.
The following window opens.
Figure 4-6. Device Setup Window – Standard Tab
This window shows all basic options that can be set in accordance with the user environment and target
device.
[ OK button]
Saves the settings in the Standard and Advance tabs and closes the window.
[ Cancel button]
Closes the window without saving the settings in the Standard and Advance tabs.
<1> Parameter
file
This file holds parameters and timing data required to rewrite the flash memory of the target device.
Do not modify the data in the parameter file because the data is related to the guarantee of rewrite
data.
The parameter file is protected by the checksum function. If the checksum result indicates an error,
the FPL3 does not accept the parameter file.
Figure 4-7. Device Setup Window – Parameter File Selection