manualshive.com logo in svg

NEC PH1202HL1, User Manual

The NEC PH1202HL1 is an advanced projector designed for professional installations. Ensure hassle-free setup with the comprehensive Installation Manual, available for free download at 88.208.23.73:8080. This manual provides detailed instructions and guidance, facilitating a seamless installation process for optimal usage of the NEC PH1202HL1 projector.

Share
Download
background image

123

5. Using On-Screen Menu

Turning On the Projector By Applying Computer Signal [AUTO POWER ON SELECT]

If set to [HDBaseT STANDBY], the projector automatically detects the synchronizing signal input from the following 
selected terminals and projects the picture accordingly: Computer, HDMI, DisplayPort, HDBaseT, and SLOT.

OFF ........................ AUTO POWER ON SELECT function will be switch off.
HDMI, DisplayPort, COMPUTER, HDBaseT, SLOT
 .............................. When a computer signal of a selected input terminal is detected, the power supply of the projector will be 

turned on automatically and the computer screen will be projected.

NOTE: 
•  If you want to activate the AUTO POWER ON SELECT function after powering OFF the projector, interrupt the signal from the 

input terminals or disconnect the computer cable from the projector and wait for at least 3 seconds before inputting the signal 
from the selected terminal. When the projector is turned off and enters HDBaseT STANDBY mode, but signals from the computer 
continue to be sent the projector, the projector maintains HDBaseT STANDBY mode and will not turn ON automatically. In addi-
tion, if signals from HDMI, DisplayPort or HDBaseT continue to be sent to the projector, depending on the settings of connected 
external devices, the projector may turn ON automatically even if it is powered off and HDBaseT STANDBY mode is in effect.

•  This function does not work when component signals come into COMPUTER IN terminal or when computer signals are Sync on 

Green or Composite Sync.

Enabling Power Management [AUTO POWER OFF]

When this option is selected you can enable the projector to automatically turn off (at the selected time: 0:05, 0:10, 
0:15, 0:20, 0:30, 1:00) if there is no signal received by any input or if no operation is performed.

NOTE:
•  The power will not go off automatically when a signal from the Ethernet/HDBaseT port is being projected.
•  [AUTO POWER OFF] appears in grey when the [STANDBY MODE] is set to [HDBaseT STANDBY] and [0:15] will be set automati-

cally.

Using Off Timer [OFF TIMER]

1.  Select your desired time between 30 minutes and 16 hours: OFF, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00.
2.  Press the ENTER button on the remote control.
3.  The remaining time starts counting down.
4.  The projector will turn off after the countdown is complete.

NOTE:
•  To cancel the preset time, set [OFF] for the preset time or turn off the power.
•  When the remaining time reaches 3 minutes before the projector is turned off, the [THE PROJECTOR WILL TURN OFF WITHIN 3 

MINUTES] message will be displayed on the bottom of the screen.

Setting for the Optional Board [SLOT POWER]

When using the optional board installed in the slot, set the following options.

PROJECTOR ON .................

This feature will turn on or off the power to the optional board. 

OFF: Forcibly turn off the power to the optional board installed in the slot.
ON (Default): Turn on the power to the optional board installed in the slot.

PROJECTOR STANDBY .......

This feature will automatically enable or disable the optional board installed in the slot 
when the projector is in standby.

DISABLE: Select this option to disable the optional board in the projector standby.
ENABLE (Default): Select this option to enable the optional board in the projector standby.

NOTE:
•  In the below three conditions are satisfied, the standby mode will go into the sleep mode.
  The optional board is connected
  In HDBaseT standby
  [PROJECTOR STANDY] for [SLOT POWER] is enable

 

Summary of Contents for PH1202HL1







































































































































































































Reviews:

No comments

Related manuals for PH1202HL1

Draper 220V Signature Series E Installation & Operating Instructions preview
220V Signature Series E
Brand: Draper Pages: 2
Eiki EK-120 Series Owner'S Manual preview
EK-120 Series
Brand: Eiki Pages: 79
WE-EF FLC210-CC LED Installation And Maintenance Instructions Manual preview
FLC210-CC LED
Brand: WE-EF Pages: 10
Tripp Lite TouchMaster (MT-6 Owner'S Manual preview
TouchMaster (MT-6
Brand: Tripp Lite Pages: 8
Optoma Pico Pocket User Manual preview
Pico Pocket
Brand: Optoma Pages: 25
Runco VX-1000c Owner'S Operating Manual preview
VX-1000c
Brand: Runco Pages: 37
Acer H6500/E-140/HE-802 Series User Manual preview
H6500/E-140/HE-802 Series
Brand: Acer Pages: 56
Acer H6555ABDKi Series User Manual preview
H6555ABDKi Series
Brand: Acer Pages: 59
Panasonic PT-302 Service Manual preview
PT-302
Brand: Panasonic Pages: 80
Panduit ATLONA AT-OME-CS31-SA-HDBT Installation Manual preview
ATLONA AT-OME-CS31-SA-HDBT
Brand: Panduit Pages: 7
Yaber Y21 User Manual preview
Y21
Brand: Yaber Pages: 19
Mitsubishi MEDALLION WS-55615 Service Manual preview
MEDALLION WS-55615
Brand: Mitsubishi Pages: 81
Sharp 55R-WP5H Service Manual preview
55R-WP5H
Brand: Sharp Pages: 112
Sharp 55R-WP4H Service Manual preview
55R-WP4H
Brand: Sharp Pages: 120
Wolf cinema SDC-10 User Manual preview
SDC-10
Brand: Wolf cinema Pages: 79
Elmo GP Dual-8 Instruction Manual preview
GP Dual-8
Brand: Elmo Pages: 11
LIBERTY AV SOLUTIONS DigitaLinx DL-SP Installation Manual preview
DigitaLinx DL-SP
Brand: LIBERTY AV SOLUTIONS Pages: 3
Proxima SVGA User Manual preview
SVGA
Brand: Proxima Pages: 48

Brands by name

Popular brands

Load more brands