background image

Limited Warranty

Residential Entertainment Plasma Monitors 

NEC Solutions, Inc. (hereinafter NEC Solutions) warrants 
this product to be free from defects in material and 
workmanship under the following terms and, subject to the 
conditions set forth below, agrees to repair or replace (at 
NEC Solutions’ sole option) any part of the enclosed unit 
which proves defective. Replacement parts or products may 
be new or refurbished and will meet specifications of the 
original parts or products. 

HOW LONG IS THE WARRANTY? 

Parts and Labor:

 Parts and Labor 

(Excluding the PDP) 

are 

warranted for (3) three years from the date of the first 
customer purchase. 

PDP (Plasma Display Panel):

 The PDP is warranted for  

(1) one year from the date of the first customer purchase. 

WHO IS PROTECTED? 

This warranty may be enforced only by the first purchaser. 

WHAT IS COVERED AND WHAT IS NOT COVERED 

Except as specified below, this warranty covers all defects in 
material or workmanship in this product. The following are 
not covered by the warranty: 

1. Any product which is not distributed in the U.S.A. or Canada by 
NEC Solutions or which is not purchased in the U.S.A. or Canada 
from an authorized NEC Solutions dealer. 
2. Any product of which the serial number has been defaced, 
modified or removed. 
3. Damage, deterioration or malfunction resulting from: 
a. Accident, misuse, abuse, neglect, fire, water, lightning or other 
acts of nature, unauthorized product modification, or failure to 
follow instructions supplied with the product. 
b. Repair or attempted repair by anyone not authorized by NEC 
Solutions.
c. Any shipment of the product (claims must be presented to the 
carrier).
d. Removal or installation of the product. 
e. Any other cause which does not relate to a product defect. 
f. Burns or residual images upon the phosphor of the panel. 
4. Cartons, carrying cases, batteries, external cabinets, magnetic 
tapes, or any accessories used in connection with the product. 
5. Service outside of the U.S.A. and Canada. 

WHAT WE WILL PAY FOR AND WHAT WE WILL 
NOT PAY FOR 

We will pay labor and material expenses for covered items, 
but we will not pay for the following: 
1. Removal or installation charges. 
2. Costs of initial technical adjustments (set-up), including 
adjustment of user controls. These costs are the 
responsibility of the NEC Solutions dealer from whom the 
product was purchased. 
3. Shipping charges. 

HOW YOU CAN GET WARRANTY SERVICE 

1. To obtain service on your product, consult the dealer from whom 
you purchased the product. 
2. Whenever warranty service is required, the original dated invoice 
(or a copy) must be presented as proof of warranty coverage. 
Please also include in any mailing your name, address and a 
description of the problem(s). 
3. For the name of the nearest NEC Solutions authorized service 
center, call NEC Solutions at 800-836-0655. 

LIMITATIONS OF LIABILITY 

Except for the obligations specifically set forth in this 
warranty statement, we will not be liable for any direct, 
indirect, special, incidental, consequential, or other types of 
damages, whether based on contract, tort, or any other legal 
theory, whether or not we have been advised of the 
possibility of such damages. This warranty is in lieu of all 
other warranties expressed or implied, including, but not 
limited to, the implied warranties of merchantability or 
fitness for a particular purpose. 

EXCLUSION OF DAMAGES 

NEC Solutions’ liability for any defective product is limited 
to the repair or replacement of the product at our option. 
NEC Solutions shall not be liable for: 

1. Damage to other property caused by any defects in this product, 
damages based upon inconvenience, loss of use of the product, loss 
of time, commercial loss; or 
2. Any other damages whether incidental, consequential or 
otherwise. Some states do not allow limitation on how long an 
implied warranty lasts and/or do not allow the exclusion or 
limitation of incidental or consequential damages, so the above 
limitations and exclusions may not apply to you. 

HOW STATE LAW RELATES TO THE WARRANTY 

This warranty gives you specific legal rights, and you may 
also have other rights which vary from state to state. 

FOR MORE INFORMATION, 
TELEPHONE 800-836-0655 
NEC SOLUTIONS (AMERICA), INC. 
1250 N. Arlington Heights Road, Suite 400 
Itasca, Illinois 60143-1248 

Note: 

All products returned to NEC Solutions (America), 

Inc. for service MUST have prior approval. To get approval, 
call NEC Solutions (America), Inc. at 800-836-0655. 

Summary of Contents for PlasmaSync 42VR5

































Reviews: