5-10 Installing Options
Replacing the minitower cover
A – Cover Tabs (under cover)
C – Cover Tabs (under cover)
B – Securing Rail (behind
panel)
D – Securing Rail (behind
panel)
3.
Slide the cover forward to meet the securing rail behind front panel.
Note
The cover fits tightly. If the cover does not slide all the way to the
front panel, place one hand on the front of the unit while you slide the
cover forward from the rear.
4.
Secure the cover with the three thumbscrews (see “Removing the
Minitower Cover”).
5.
If you have a chassis lock that connects to the Kensington
®
Security
Standard connector, reconnect it to the chassis.
6.
If you have a padlock for the locking tab on the rear edge if the
chassis, replace it.
7.
Reconnect all external peripherals.
8.
Plug in your power cables.