5-12 Installing Options
4.
Slide the floor back about one-half inch along the chassis.
5.
Once the floor tabs are free of the slots in the chassis, lift the floor
away from the chassis.
Removing the chassis floor
A – Slots
C – Tabs (behind chassis floor)
B – Chassis Floor
Replacing the Chassis Floor
To replace the minitower chassis floor, proceed as follows.
1.
Place the system unit on its right side.
2.
Line up the chassis floor with the chassis so its untabbed edge is
along the lower (right) edge of the chassis.
3.
The tabs along the upper edge of the floor must line up with the slots
in the upper edge of the chassis.
4.
Press the floor up against the bottom of the chassis.
5.
Slide the floor toward the front of the chassis to lock the tabs in the
slots.
6.
Secure the floor to the chassis with the thumbscrew.