Installing Options 5-21
Removing a DIMM
If your memory configuration requires the removal of a module, perform
the following steps:
Before opening the computer and before
handling boards or memory modules, reduce static discharge by touching
the system's metal chassis.
1.
Remove the system unit cover (see “System Unit Cover”).
2.
Locate the system memory upgrade sockets on the system board (see
“System Board Options”). Any socket (or all) can contain a DIMM
memory module.
3.
Press the plastic clips at the outer edges of the socket away from the
memory module. This ejects the DIMM from the socket.
Removing a DIMM
A – Plastic Clip
Installing a DIMM
Install a memory module by performing the following steps:
1.
Remove the system unit cover (see “System Unit Cover”).