Installing Options 5-29
Insertion/extraction latch in the minitower
A – System Board
B – Insertion/Extraction Latch
4.
Carefully slide the board the rest of the way out, taking care not to lift
the board before it is free of the chassis.
Replacing the System Board
Take care when replacing the system board. Replacing the board requires
the use of the chassis latch. Incorrect use of the chassis latch can damage
the latch.
Take care in replacing the system board in your
computer. Incorrect use of the chassis latch can damage the latch.
Use the following procedure to use the latch correctly.
1.
Make sure the chassis latch is in the open position.
2.
Position the narrow end of the system board rail in the chassis guide.
3.
Slide the system board partway into the system unit along the chassis
rail guide. Stop sliding the board when the outside edge of the system
board aligns with the outside edge of the chassis (see the following
figures).