Installing Options 5-41
Preparing the Device
Before installing a storage device in the system, follow any preinstallation
instructions that come with the device. For example, check the following
information:
!
Diskette drive — remove any termination on the optional diskette
drive. See the documentation that comes with the drive.
!
IDE drive — check the jumper settings on the device before installing
it. See the documentation that comes with the device for jumper
setting information.
!
CD-ROM drive or DVD-ROM drive must be set correctly as the first
(master) or second (slave) device on the IDE channel.
See “Connecting Device Cables” for more information.
Connecting Device Cables
The cables used for installing optional storage devices include the
following:
!
diskette drive signal cable
!
IDE signal cables
!
internal SCSI device cables
!
PC adapter card cables
!
system power cables.
Riser board cable drive connectors are shown in the following figures.
The Wake-On LAN connector on the desktop riser board is not shown. It
is located above the PCI slot and to the right of the Modem In connector.