5-48 Installing Options
PC Card Adapter Cabling
The following procedure describes how to cable a PC card adapter.
1.
Connect the connectors at one end of the cable set to the PC adapter
board. (The PC adapter board is installed in one of the expansion
slots. See “Installing an Expansion Board” if the board must be
installed first.)
The connectors are keyed to fit only one way.
2.
Connect the connectors at the other end of the cable set to the
connectors at the rear of the PC card adapter.
Internal SCSI Device Cabling
To connect an internal SCSI device, perform the following steps:
1.
Connect the SCSI device to the last free connector on the SCSI
device cable (see the following figure).
Connecting an internal SCSI device
A – SCSI Cable
B – Power Cable
2.
Locate an available power connector coming from the power supply.