3-20 Configuring the System
Security Menu Items
Menu Item
Settings (default is bold) and description
Set Supervisor
Password
[Enter]
Use this field to set or change the supervisor password.
Press Enter to bring up a dialog box where the password
can be entered and confirmed.
Clear User Password
[Enter]
Press Enter to clear the user password when logged on
as Supervisor.
User Setup Access
Enabled, Disabled
When both the User Password and Supervisor
Passwords are enabled, only the Supervisor Password
gives full access to all Setup fields.
When User Setup Access is set to Enabled, the user has
read-only access to the BIOS Setup utility.
Unattended start
Disabled, Enabled
The Unattended Start field controls the point at which the
user password is required. When this field is set to
Disabled, the user is prompted for the password before
the system can boot. The “Enter Password” prompt is
displayed.
When this field is set to Enabled and a user password is
established, the system can complete a boot and run
without prompting the user for a password (except when
booting from a diskette). However the keyboard is
locked; the user password must be entered to unlock it.
The BIOS does not prompt for the password, but the
keyboard lamps come on.
This field is read-only if no user password has been
established.