10 NEC PowerMate 8100 Series Release Notes
Double click one or more entry in the list of applications and online
documents. A check mark should appear to the left of each entry that is
double clicked. To deselect an entry, double click it again so that the check
mark disappears.
4.
Click
OK
. The application files reload sequentially, and a progress bar
appears for each application selected.
5.
When the installation completes, choose
Restart
. Remove the CD from the
CD-ROM drive. Click
OK
at the Reminder to remove the CD.
6.
Repeat steps 2 through 5 for each option or set of options to be installed.
NEC WebTelligent Installation
Install the NEC WebTelligent software and the NEC Auto Discovery Agent
software on a Windows 98, Windows 95, or Windows NT web server as
follows.
Note:
This section replaces the section “NEC
WebTelligent Installation” in the printed
PowerMate 8100
Series User’s Guide.
1.
Close all open applications before installing WebTelligent and Auto
Discovery Agent.
2.
Install web server software on a machine with a host name such as
PowerMate-A
. Set up the web server as follows.
Install your web server software — Microsoft Personal Web Server or
other software.
On the Windows desktop, click
Start
, point to
Settings
, and click
Control Panel
.
At the Control Panel, double click
Personal Web Server
.
In Personal Web Server, click the
Administration
tab.
In Administration, click
Administration
to start your web browser.
If the web browser does not start, click the
Startup
tab, click
Start
,
click the
Administration
tab, and click
Administration
to start the
browser.
3.
Install the NEC WebTelligent software using the NEC Select Install CD.
Insert the NEC Select Install CD into the CD-ROM drive. Click
Cancel
in
the screen.
4.
Click
Start
on the taskbar, point to and click
Run
, and type
E:\NECUtil\WebTelig\Admin\setup.exe
where
E:
represents the CD-ROM
drive.
