3-14 Configuring the System
Advanced Menu - Power Management Setup
Menu Item
Settings (default is bold)
ACPI Standby State
S1/POS, S3/STR
Select S1/POS for a low wake-up latency sleeping
state. In the S3/STR mode, the CPU, cache, and
chipset contexts are lost.
USB Keyboard Wakeup
From S3
Disabled, Enabled
Select Enabled to allow the system to wake up from a
keyboard input when in S3 mode.
Power
Management/APM
Enabled, Disabled
Select Enabled to enable Power Management and
Advanced Power Management (APM).
Suspend Time Out
(Minutes)
Disabled, 1, 2, 4, 8, 10, 20, 30, 40, 50, 60
Specifies duration of system inactivity while in
Standby state before entering Suspend power state.
Power Button Function
Suspend, On/Off
Suspend sets the power switch for Suspend (Sleep)
mode. With power on, pressing the switch once
places the system in sleep mode. Pressing and
holding the switch in for 4 seconds turns power off.
Restore on AC/Power
Loss
Last State, Power Off, Power On
The Power On setting automatically turns power on
after a power loss. The Power Off setting requires the
user to restart the system with the power button. The
Last State setting restores the system to the state
where it was on power loss.
Resume on Ring
Disabled, Enabled
The Enabled setting automatically reboots the system
when a signal is sent through a modem.