Installing Options 4-11
Removing the Expansion Board Retainer Bar
Expansion boards and slot covers are held in place by an expansion board
retainer bar. Remove the retainer bar as follows.
1.
Remove the cover (see “Removing the Cover” earlier in this chapter).
2.
Press down on the two tabs on the retainer bar to release the tabs
from their slots. Carefully remove the bar from the chassis.
Removing the expansion board retainer bar
A – Retainer Bar Tabs
B – Tab Slots
3.
If you are adding an expansion board, see “Installing an Expansion
Board.”
4.
If you are removing an expansion board, see “Removing an
Expansion Board.”
5.
To replace the bar, see “Installing the Expansion Board Retainer Bar”
later in this chapter.
