Installing Options 4-13
6.
Hold the new expansion board by its edges or its bracket and insert it
into the expansion slot.
Installing an expansion board
A – Expansion Board
7.
Firmly press the board into the expansion slot connector on the
system board.
8.
If you installed a network board with Wake-On LAN (WOL):
!
Connect the WOL cable to the WOL connector on the system
board and to the network board. See the documentation supplied
with the board for connector location. The WOL connector is
between the PCI 1 and PCI 2 connectors on the system board.
!
Enable Wake-On LAN through the BIOS (see Chapter 3 for
information).
9.
Secure the expansion board in place with the retainer bar (see
“Installing the Expansion Board Retainer Bar”).
10.
Attach any signal cables required by the expansion board.
11.
Replace the cover (see “Replacing the Cover”).