Installing Options 4-17
Memory Upgrade
Memory upgrades are installed into three DIMM sockets on the system
board. The sockets support up to 512 MB of high-speed SDRAM
memory. The system supports SDRAM DIMM modules in 32-, 64-, 128-,
256-, and 512-MB (when available) memory configurations.
Use the following guidelines in selecting DIMM modules:
!
DIMM modules can be installed in one, two, or three sockets
!
single- and double-sided DIMMs are supported
!
the size and speed of the DIMM modules can vary between sockets
but the memory operates at the speed of the slowest module.
For sample memory configurations, see the table “Sample DIMM
Upgrade Paths.”
To locate memory module sockets on the system board, see the previous
figure, “Locating the DIMM and processor sockets.”
To determine the memory you need to purchase for a memory upgrade,
see “Checking System Memory.”
Sample DIMM Upgrade Paths
Total Memory*
DIMM 1
DIMM 2
DIMM 3
64 MB
32 MB
32 MB
Empty
64 MB
64 MB
Empty
Empty
96 MB
32 MB
32 MB
32 MB
128 MB
32 MB
32 MB
64 MB
128 MB
64 MB
64 MB
Empty
128 MB
128 MB
Empty
Empty
192 MB
64 MB
64 MB
64 MB
256 MB
64 MB
64 MB
128 MB
256 MB
128 MB
128 MB
Empty
256 MB
256 MB
Empty
Empty