4-22 Installing Options
4.
Remove the fan, heat sink, and retention clip from the processor.
!
Simultaneously press down on the flange on the end of the
retention clip while carefully pulling out the end to unhook it
from the tab on the processor socket.
!
Unhook the retention clip from the tab on the opposite side of the
processor socket.
!
Remove the fan, heat sink, and retention clip from the processor.
Removing the fan, heat sink, and processor
A – Heat Sink
D – Processor
B – Retention Clip
E – Retention Clip Flange
C – Lock Lever
5.
Remove the processor.
!
Pull out on the processor socket lock lever just enough to release
the lever from the socket, then pivot the lever up to release the
processor.
!
Carefully lift up on the processor and remove it from the socket.
Store the processor in a static-free bag.
6.
Install the upgrade processor (see “Installing an Upgrade Processor”
in the next section).