4-24 Installing Options
5.
Install a replacement heat sink and fan as follows and in accordance
with any procedures contained in the heat sink kit.
!
If the kit includes a thermal pad, center it on top of the processor.
!
Align the heat sink and fan assembly with the processor and set
it down on the processor (see the previous figure for alignment).
!
Attach the heat sink retention clip by hooking the non-flange end
of the clip over the socket tab.
!
Press the opposite end of the clip over the tab on the socket until
it snaps in place.
6.
Plug the cooling fan cable into its connector (CPU Fan) on the system
board.
7.
Replace the cover (see “Replacing the Cover”).
8.
Connect any peripherals and power cords, and power up the system.
