Preventive Maintenance 6-3
Mouse Cleaning
The mouse has a self-cleaning mechanism that prevents a buildup of dust or lint around the
mouse ball and tracking mechanism under normal conditions. Periodically, however, the mouse
ball must be cleaned. Use the following procedure to clean the mouse.
Note
The following procedure describes cleaning of a typical mouse and should be used as
a guideline. The procedure and mouse configuration might differ, depending on the type of
mouse you have.
1.
Unplug the mouse from the system.
2.
Turn the mouse upside down and locate the ball cover.
Locating a Typical Mouse Ball Cover
A
– Mouse Ball Cover
3.
Turn the ball cover counterclockwise and remove the cover.
4.
Turn the mouse over and remove the ball.
5.
Clean the mouse as follows:
!
Clean the mouse ball with tap water and a mild detergent, then dry it with a lint-free
cloth.
!
Remove any dust and lint from the mouse socket.
6.
Replace the mouse ball in its socket.
7.
Replace the ball cover and turn it clockwise until it locks in place.
8.
Connect the mouse to the mouse port.
9.
Plug in the AC power cord and press the power/sleep button.
Summary of Contents for POWERMATE CT 815 - RELEASE NOTES
Page 13: ...1 System Overview Configurations Features Components Software...
Page 106: ...6 Preventive Maintenance System Cleaning Keyboard Cleaning Mouse Cleaning...
Page 109: ...7 Troubleshooting Checklist Diagnostics...
Page 118: ...8 NECC Information Services Service and Support Functions Technical Support...
