System Configuration 2-11
Main Menu Items
Menu Item
Settings (default is bold)
Type
Auto
, User, CD-ROM, Floptical, Not Installed, 1-46
When set to Auto, the BIOS sets the correct values for the device,
including Cylinders, Heads, Write Precompensation, Sectors,
Maximum Capacity, Fast Programmed I/O Mode, 32 Bit Transfer
Mode, LBA Mode, and Block Mode.
Selecting User allows you to configure the BIOS for the device
selected.
The Not Installed setting indicates that there is no IDE device
present in the system.
Depending on the option selected, one of the following submenus
displays.
Cylinders, Heads,
Write
Precompensation,
Sectors, Maximum
Capacity options
When Type is set to Auto, the value in the field is auto-detected
and the field is read only.
Fast Programmed I/O
Modes
Auto
, 0 -5
Use these settings to configure the Advanced PIO Mode.
32 Bit Transfer Mode
On
, Off
When On, allows 32 bit IDE data transfers. Should only be On if
supported by a chipset controller.
LBA Mode
On
, Off
When On is selected, it causes logical block addressing to be used
in place of cylinders, heads, and sectors.
Block Mode
On
, Off
When On is selected, it allows block mode data transfers.
Auto Detect Hard
Drives
Press
Enter
Auto detects all hard drive parameters.
CPU Speed
xxx MHz
Not selectable, displays information only.
Front Side Bus Speed
xxx MHz
Not selectable, displays information only.
Memory Size
xxx MHz
Not selectable, displays information only.
Memory Speed
xxx MHz
Not selectable, displays information only.
BIOS Version
Axxxxxx
Not selectable, displays information only.
Summary of Contents for POWERMATE CT 815 - RELEASE NOTES
Page 13: ...1 System Overview Configurations Features Components Software...
Page 106: ...6 Preventive Maintenance System Cleaning Keyboard Cleaning Mouse Cleaning...
Page 109: ...7 Troubleshooting Checklist Diagnostics...
Page 118: ...8 NECC Information Services Service and Support Functions Technical Support...