System Configuration 2-13
Advanced Menu - Advanced Configuration
Menu Item
Settings (default is bold)
Try Other Boot Devices
Yes
, No
Select Yes to cause the system to try to boot from other boot
devices if there is a boot failure. Selecting No causes the boot to
be carried out from selected devices.
Floppy Access Control
Read-write
, Read-only
Select Read-write to allow the diskette drive to have read-write
capabilities.
S.M.A.R.T. for Hard
Disks
Disabled
, Enabled
Select Enabled to use the Self Monitoring Analysis and Reporting
Technology (S.M.A.R.T.) for reporting a possible problem with an
IDE device. After receiving the warning, the BIOS alerts you to the
problem.
Boot-up Num-Lock
Off,
On
Select On to lock the numeric keypad on boot up.
Boot to OS/2>64 MB
No
, Yes
Select Yes to enable a boot to OS/2 if RAM is greater than 64 MB.
CPU Serial Number
Enabled
, Disabled
Controls detection of the processor serial number.
Advanced Menu - Advanced Chipset Setup
Menu Item
Settings (default is bold)
USB Function
Enabled
, Disabled
Select Enabled to enable use of USB functions for USB devices.
USB Keyboard/Mouse
Legacy Support
Enabled
, Disabled
Select Enabled to enable the USB functions for a USB keyboard
and mouse.
Memory Hole
15MB-16MB,
Disabled
Select Enabled to reserve a space in the memory, between 15 and
16 MB, for certain ISA boards.
ClkGen Spread
Spectrum
Disabled,
Enabled
Select Enabled to enable the Clock Generator Spectrum and limit
the risk of electromagnetic emissions.
ClkGen for PCI
Slot/DIMM
Disabled,
Enabled
Select Enabled to enable the Clock Generator for PCI and DIMM
slots.
Summary of Contents for POWERMATE CT 815 - RELEASE NOTES
Page 13: ...1 System Overview Configurations Features Components Software...
Page 106: ...6 Preventive Maintenance System Cleaning Keyboard Cleaning Mouse Cleaning...
Page 109: ...7 Troubleshooting Checklist Diagnostics...
Page 118: ...8 NECC Information Services Service and Support Functions Technical Support...