3-28
Disassembly and Reassembly
Removing the Battery
A
– Battery
B
– Clip
6.
With the positive (+) side of the new battery facing up, press the battery into the socket.
7.
Replace the system cover.
8.
Connect external peripherals and power cables, and power up the system.
9.
Run the Setup Utility to reconfigure your system parameters (see “BIOS Setup Utility” in
Section 2).
Front USB Port
Remove the front USB port as follows.
1.
Remove the system cover and front panel (see “Removing the Cover” and “Removing the
Front Panel”).
2.
Disconnect the front USB port cable from its header on the system board.
3.
Remove the two screws that secure the USB port to the front of the chassis. Save the
screws.
Locating Front USB Port Screws
A
– Screw
B
– USB Port Board
4.
Gently pull the board off the chassis and feed its cable through the cutout in the front of the
chassis. Set the board aside.
Summary of Contents for POWERMATE CT 815 - RELEASE NOTES
Page 13: ...1 System Overview Configurations Features Components Software...
Page 106: ...6 Preventive Maintenance System Cleaning Keyboard Cleaning Mouse Cleaning...
Page 109: ...7 Troubleshooting Checklist Diagnostics...
Page 118: ...8 NECC Information Services Service and Support Functions Technical Support...