Disassembly and Reassembly 3-31
Power Supply
Remove the power supply as follows.
Before removing the system cover, turn off the power and unplug the
system power cable. Power is removed only when the power cable is unplugged.
1.
Turn off the system and any connected peripherals.
2.
Unplug the system AC power cord and any peripheral power cords.
3.
Unplug any attached peripherals.
4.
Remove the system cover (see “Removing the Cover”).
5.
Label and unplug the power cables from all installed devices.
6.
Remove the four screws holding the power supply to the rear of the chassis.
Removing the Power Supply Screws
A
– Screws (4)
7.
Slide the power supply towards the front of the chassis enough to clear the chassis.
8.
Lift the power supply out of the chassis.
9.
Set the power supply aside.
Summary of Contents for POWERMATE CT 815 - RELEASE NOTES
Page 13: ...1 System Overview Configurations Features Components Software...
Page 106: ...6 Preventive Maintenance System Cleaning Keyboard Cleaning Mouse Cleaning...
Page 109: ...7 Troubleshooting Checklist Diagnostics...
Page 118: ...8 NECC Information Services Service and Support Functions Technical Support...