1-12 Setting Up the Computer
One beep indicates that the system has successfully
completed the power-on test. After about five seconds,
Windows starts up.
If a problem occurs, a series of beeps may sound. If this
happens repeatedly after powering on, power off the system
and turn to Chapter 5, Solving System Problems. This
chapter provides some helpful hints on obvious system
problems.
NOTE
If the system displays a message indicating
that system settings have changed, run Setup (see
Chapter 2, NECCSD Utilities).
On PowerMate NetPC systems loaded with the
Windows NT
®
4.0 operating system, press
Ctrl-Alt-Del
when prompted on-screen to do so. The log-on box appears
for entering a password.
Shutting Down
Follow these steps to shut down (power off) your computer.
1.
Save your work. See the documentation that comes with
your application.
2.
Exit the application program.
3.
Make sure that the hard disk drive is not in use. A lit
hard disk activity lamp indicates that the drive is in use.