3-16 Option Installation
Processor Installation
1.
Remove the processor currently in the system (see above).
CAUTION:
Before picking up the processor,
reduce static discharge by touching the metal
frame of the system unit.
2.
Align the notched corner of the processor with the alignment corner in the socket
and insert the processor.
3.
Swing the lever down to lock the processor into the socket.
CAUTION:
Remember to either reattach the
heatsink used with the old processor or install the
new heatsink supplied with the upgrade
processor.
4.
Check to see if the newly installed processor requires a system board jumper
change (see Appendix B, "System Board Jumpers").
5.
Replace any boards removed during this procedure.
6.
Replace the system unit cover.
