- 10 -
Step 1 (for P6000 series only)
a. Position the system unit carefully so that the screen is facing down.
Note
Use a smooth, flat surface, and cover it with a non-abrasive material such as a soft
cloth to prevent damage to your screen.
CAUTION
The hinge stopper must be installed. Without it, the system unit will fall and may get
damaged.
b. Carefully open the stand. The stand is attached with a spring, so use your hand to hold it
open.
c. Attach the hinge stopper by first inserting the top clips into their corresponding slots.
Secondly, insert the bottom clip into its corresponding slot.
d. Slowly release the stand. Place the system unit in its proper position.
