Installing Options 3-61
Attaching device rails
4.
From the front of the system, insert the device, connector
end first, into the device slot.
NOTE
To easily access device connectors for
cabling, do not insert a 5 1/4-inch device all the way
into the slot.
5.
Connect the device cables.
6.
Secure the device as follows (refer to the following
figure).
If installing in the top slot, align the holes in the
device with the holes in the side of the system unit.
Secure the device to the system with the four screws,
two to a side, that come with the device.
If installing in the middle and bottom slots, secure the
device to the system from the front with the two
metal slot cover screws.
