Option Installation 3-21
2.
Locate the processor socket (see “System Board Options” earlier in this section).
If any expansion boards are obstructing the socket, remove the boards.
2.
Release the heatsink clip from the tabs on the socket.
3.
Release the processor by pulling the lever on the socket away from the socket and
as far back as it goes without forcing.
Figure 3-20 Releasing the Processor
CAUTION:
Before picking up the processor,
reduce static discharge by touching the metal
frame of the system unit.
4.
Lift the processor out of the socket.
5.
Continue with the following procedure to install the new OverDrive processor.
Installing the OverDrive Processor
1.
Remove the processor currently in the system (see previous procedure).
CAUTION:
Before picking up the OverDrive
processor, reduce static discharge by touching
the metal frame of the system unit.
2.
Align the notched corner of the OverDrive processor with the alignment corner in
the socket and insert the processor.
Summary of Contents for POWERMATE P2166
Page 217: ...Index 4 ...