3-40 Option Installation
5.
Install the device (see the following section “Installing the Minitower 5 1/4-Inch
Device”).
Installing the Minitower 5 1/4-Inch Device
Install an accessible device into the device cage as follows.
1.
Follow the preinstallation instructions that come with the device, such as setting
jumpers and switches.
2.
If installing the device in the top slot, go to step 4. Otherwise, continue with
step 3.
3.
Attach the rails (supplied with the computer) to the sides of the device.
Figure 3-43 Attaching Device Rails
4.
From the front of the system, insert the device, connector end first, into the device
slot.
NOTE:
To easily access device connectors for
cabling, do not insert a 5 1/4-inch device all the
way into the slot.
5.
Connect the device cables.
6.
Secure the device as follows (see the following figure).
If installing in the top slot, align the holes in the device with the holes in the
side of the system unit.
Secure the device to the system with the four screws, two to a side, that come
with the device.
Summary of Contents for POWERMATE P2166
Page 217: ...Index 4 ...
